top of page

Group

Public·46 members
Luis Shaikh
Luis Shaikh

VAG-COM: A Diagnostic Software for VW/Audi/SEAT/Skoda


VAG-COM: A Diagnostic Software for VW/Audi/SEAT/Skoda




VAG-COM is a software that allows you to connect your PC to your car's on-board diagnostic system and access various functions and parameters. You can read and clear fault codes, view live data, perform basic settings, code modules, and more. VAG-COM is compatible with most Volkswagen, Audi, SEAT, and Skoda models from 1990 to 2022.




VAG COM 208.1 PL VAG COM 311.2 ENG.rar



VAG COM 208.1 PL VAG COM 311.2 ENG.rar is a file that contains two versions of VAG-COM: one in Polish and one in English. The Polish version is 208.1 and the English version is 311.2. These are older versions of VAG-COM that may not support some newer features or vehicles. The latest version of VAG-COM is VCDS, which can be downloaded from the official website[^4^].


If you want to use VAG COM 208.1 PL VAG COM 311.2 ENG.rar, you will need a compatible interface cable that connects your PC to your car's OBD-II port. You will also need to install the drivers for the cable and the software on your PC. You can find the instructions and manuals for VAG-COM 311.2 in English[^1^] or Polish[^2^].


VAG-COM is a powerful tool that can help you diagnose and troubleshoot your car's problems, but it also requires some knowledge and caution. You should always backup your original settings before making any changes, and consult a professional if you are unsure about anything. VAG-COM is not affiliated with or endorsed by Volkswagen AG or any of its subsidiaries.How to Use VAG-COM




Before you use VAG-COM, you need to make sure that your PC and your car are ready. Here are some steps to follow:


  • Turn off any antivirus or firewall software on your PC, as they may interfere with the communication between VAG-COM and your car.



  • Connect the interface cable to your PC's USB port and install the drivers. You may need to restart your PC after the installation.



  • Connect the other end of the cable to your car's OBD-II port, which is usually located under the dashboard on the driver's side.



  • Turn on the ignition of your car, but do not start the engine.



  • Run VAG-COM on your PC and select the appropriate COM port for the cable. You can test the connection by clicking on [Options] and then [Test]. You should see a message that says "Port Status: OK, Interface: Found!"



  • Select the [Auto-Scan] function to scan all the control modules in your car and display their fault codes. You can save or print the scan results for future reference.



  • Select the [Select Control Module] function to access a specific module and view its live data, perform basic settings, code new values, or clear fault codes. You can also use the [Applications] function to access some special features, such as measuring blocks, output tests, or service reminder reset.



  • When you are done, exit VAG-COM and disconnect the cable from your car and your PC.



Remember to always backup your original settings before making any changes, and consult a professional if you are unsure about anything. VAG-COM is not affiliated with or endorsed by Volkswagen AG or any of its subsidiaries. e0e6b7cb5c


About

Welcome to the group! You can connect with other members, ge...

Members

Group Page: Groups_SingleGroup
bottom of page